The EM78F661N is an 8-bit microprocessor designed and developed with low-power, high-speed CMOS technology and high noise immunity. It has an on-chip 1K×13-bit Electrical Flash Memory and 128×8-bit in-system programmable
EEPROM. It provides three protection bits to prevent intrusion of user's Flash memory code. Twelve Code option bits
are also available to meet user's requirements.
With its enhanced Flash-ROM features, the EM78F661N provides a convenient way of developing and verifying user's
programs. Moreover, this Flash-ROM device offers the advantages of easy and effective program updates, using development and programming tools. Users can avail of the ELAN Writer to easily program their development codes.
0.00
0.00
The EM78F661N is an 8-bit microprocessor designed and developed with low-power, high-speed CMOS technology and high noise immunity. It has an on-chip 1K×13-bit Electrical Flash Memory and 128×8-bit in-system programmable
EEPROM. It provides three protection bits to prevent intrusion of user's Flash memory code. Twelve Code option bits
are also available to meet user's requirements.
With its enhanced Flash-ROM features, the EM78F661N provides a convenient way of developing and verifying user's
programs. Moreover, this Flash-ROM device offers the advantages of easy and effective program updates, using development and programming tools. Users can avail of the ELAN Writer to easily program their development codes.
Features
CPU configuration
1K×13 bits on-chip Flash memory
48×8 bits on-chip registers (SRAM)
128 bytes in-system programmable EEPROM
*Endurance: 1,000,000 write/erase cycles
More than 10 years data retention
8-level stacks for subroutine nesting
3 programmable Level Voltage Reset LVR : 4.0V, 3.5V, 2.7V
Less than 1.5 mA at 5V / 4 MHz
Typically 20 μA, at 3V / 32kHz
Typically 1.5 μA, during sleep mode
I/O port configuration
3 bidirectional I/O ports: P5, P6 and P8
14 I/O pins
Wake-up port : P6
High sink port : P6
6 programmable pull-high I/O pins
5 programmable pull-down I/O pins
6 programmable open-drain I/O pins
External interrupt with Wake-up : P60
Operating voltage range
2.4V~5.5V at -40°C~85°C (Industrial)
2.2V~5.5V at 0°C~70°C (Commercial)
Operating frequency range (base on two clocks)
Crystal mode : DC~16MHz @ 4.5V~5.5V ;
DC~8MHz @ 3V~5.5V ;
DC~4MHz @ 2.2V~5.5V
ERC mode : DC~16MHz @ 4.5V~5.5V ;
DC~8MHz @ 3V~5.5V ;
DC~4MHz @ 2.2V~5.5V
IRC mode : DC~16MHz @ 4.5V~5.5V ;
DC~4MHz @ 2.2V~5.5V
Internal RC
Frequency
Drift Rate
Temperature
(-40°C~85°C)
Voltage
(2.4V~5.5V)
Process
Total
4 MHz
± 3%
± 5%
± 2.5%
± 10.5%
16 MHz
± 3%
± 5%
± 2.5%
± 10.5%
8 MHz
± 3%
± 5%
± 2.5%
± 10.5%
Six available interrupts
Internal interrupt : 3
External interrupt : 3
6 channels Analog-to-Digital Converter with 10-bit resolution
One set of comparator Offset voltage: smaller than 5 mV